lighting products

Platform II Dome Lens

This multi-purpose LED fixture kit provides a Type V distribution with a main beam of 55 degrees vertical. This combination is suited for intersection, garage, low-bay and other general lighting applications. This assembly is IP66 rated. The LEDs are mounted 6-12” away from the optical surface which provides exceptional hiding power

Applications

Platform II is suited for intersection, parking garage, garage, low-bay and other general lighting applications.

Features

  • One-piece casting design can effectively dissipate up to 100W in a 40ºC ambient temperature with an appropriate LED module.
  • Board mounting feature allows a variety of different board shapes and sizes without the need for any drilling or tapping.
  • The cast aluminum heat sink is offered either raw or powder coated white.
  • The acrylic prismatic lens provides exceptional LED hiding and an excellent light distribution.
  • Lumieo® acrylic and polycarbonate lens versions are optional.
  • Suitable light engines are 100W or less, not including driver.
  • Acrylic versions are covered by our 10 year limited warranty.
  • Paint finish on castings is covered against significant fading or peeling for a period of 5 years, due to weathering alone.

Approvals and Listings

  • ETL Listed to UL1598 and 8750; file sharing program available to all customers
  • IP66 Rated
  • NSF International certified for NSF/ANSI Standard 2 – Food Equipment

Specifications

Dimensions Dome Lens
8.7” high
13.9” diameter

Materials
Acrylic:
Clear
Moon Glow™
Lumieo®
Polycarbonate:
Clear

Accessories/Options
Mounting Hook
Lens Clips
LED Driver Cover
Aluminum Reflector
Silicone Gasket

Photometry

Description PDF
Platform II with Platform II Dome Lens and 126 LED LYNK LABS board 65W @ 277V 06019
Platform II with Platform II Polycarbonate Dome Lens and 5000K Flextron LED Board with Inventronics EUC-096S280DT 05352
Platform II with Platform II Frost Acrylic Dome Lens and 5000K Flextron LED Board with Inventronics EUC-096S280DT 05351
Platform II with Platform II Acrylic Dome Lens and 5000K NORLUX LED Board with Thomas Research Products PLED96W- 034-C2800-D 05326
Platform II with Platform II Acrylic Dome Lens and 5000K NORLUX LED Board with with Inventronics EUC-096S280DT 05325
Platform II with Platform II Acrylic Dome Lens and 5000K NORLUX LED Board with Thomas Research Products PLED96W- 034-C2800-D 05319

Components

Cast Aluminum Heat Sink

This one-piece casting design can effectively dissipate up to 100W in a 40ºC ambient temperature with an appropriate LED module. The cast aluminum heat sink is offered either raw or powder coated white. There are two suggested LED Board mounting options. To achieve a wide, Parking Garage distribution, an LED board may be mounted to the horizontal inside top surface.

To achieve a wide, Parking Garage distribution, there are 12 internal LED board mounting surfaces which are canted 35 degrees from vertical. A new board mounting feature allows a variety of different board shapes and sizes without the need for any drilling or tapping. Boards may effectively be mounted on 4, 6, 8, 9 or 12 faces.

Part No.: 209371

Dome Lens Option

The acrylic prismatic Dome lens provides exceptional LED hiding and an excellent light distribution. Lumieo® acrylic and polycarbonate versions are optional.

Part No.: 833945

Lens Clips

These stamped stainless steel lens retaining clips are specifically designed to retain LexaLite® Platform Series lenses. The wide face spreads the compression load over a large surface area, reducing stress. The clips rely on a gasket being in place to provide modest pressure against the flange. The clips will seat against a positive stop in the back of the mounting screw hole to avoid excessive pressure being applied to the lenses.

Part No.: 209347

Lens Gasket

A.L.P. recommends a medium compression foamed silicone gasket to provide an IP66 seal. Foamed silicone provides long life, retention of compression properties, and reduced out-gassing. A.L.P. urges customers to avoid EPDM gaskets due to out-gassing and its potential effects on both lenses and LEDs.

Part No.: 209366