lighting products

Sentry Elite® 2ft

Sentry Elite® LED combines the benefits of LED technology with the features OEMs have come to rely upon in the flagship Sentry series. Sentry Elite LED utilizes gear tray internal construction for cost effectiveness and functional practicality by minimizing required internal metal components. Drivers mount to the driver tray for thermal isolation. The Sentry Elite housing is sealed against dust and moisture and available in a variety of lens, latch, and wire-entry configurations.

Applications

Ideal for use in dusty, dirty, or wet environments including food processing, cold storage, kitchens, parking garages, car washes, covered canopies, pedestrian tunnels, concourses, and industrial.

Features

  • Rigid one piece housing construction.
  • Two 1/4-28 brass studs molded into back of housing for attachment of optional mounting brackets.
  • En-seal™ gasketing provides superior resistance to moisture absorption versus conventional gasketing.
  • Lens retained by eight captive flush mounted latches.
  • Molded latch pockets compatible with standard and tamper-proof latches in white polycarbonate and stainless steel.
  • Gear trays secured to #10-32 brass studs molded into housing via threaded hex steel mounting standoffs.
  • LED Module tray available for four rows of nominal 22” LED boards.
  • LED Gear Trays attached to two hex metal standoffs which heat sink the gear tray to the driver tray.
  • LED Module tray suspends from housing by two security straps during servicing.

Certifications

  • UL/cUL recognized component
  • Wet Location listed
  • IP65, IP66 and IP67
  • IP69K Rated using 2SNGPG50 and 2SNGPGPC lenses*
  • 40° C ambient temperature rating when used with LGIT light engines.
  • NSF International certified for NSF/ANSI Standard 2 – Food Equipment

Specifications

Housing
Compression molded self-extinguishing fiberglass reinforced polyester compound with UL 5V flame rating (ASTM D635-74). F1 weatherability rating.

Gasketing
En-Seal ™ continuous perimeter poured gasket assures lens seal to housing.

Electrical Chassis
Gear trays constructed of minimum 83% reflective, 22-gauge, pre-painted steel.

Conduit Entry
Standard housings available with one 7/8” conduit entry point on either or both ends. Consult Sales for other opening sizes or for top openings.

Lens
Inline thermoformed low profile lenses available in 50% DR acrylic in clear, crepe and Lumieo. Lenses for parking garage applications available in 50% DR clear acrylic, polycarbonate and Lumieo.

Mounting
Standard 316 stainless steel straps (SBRKT-SNG-2PK) for surface of all-thread pendant mounting, or optional flush mounting bracket. That serves as a mounting point for either a snap-in-place mount or a hook. Consult A.L.P. Sales for cable mounting options.

Components

Sentry Elite 2ft Housing

Rigid one piece housing construction is compression molded self-extinguishing fiberglass reinforced polyester compound with UL 5VA flame rating (ASTM D635-74). F1 weather ability rating.

Part No.: 2SE-2

LED Module Gear Tray

Module gear trays constructed of minimum 83% reflective, 22-gauge, pre-painted steel. LED Module tray available for two rows of nominal 22” LED boards.

Part No.: Flat Gear Tray

LED Driver Gear Tray

2' Sentry Elite driver gear tray constructed of minimum 83% reflective, 22-gauge, pre-painted steel.

Part No.: SENTDT2-LED

Lens

Inline thermoformed low profile lenses available in 50% DR acrylic in clear, crepe and Lumieo. Lenses for parking garage applications available in 50% DR clear acrylic, polycarbonate and Lumieo.

Part No.: 2SNGPG50

Latches

Lens retained by eight captive flush mounted latches. Molded latch pockets compatible with standard and tamper-proof latches in white polycarabonte and stainless steel.

Part No.: LSNG-PC

Wire Entry Plugs

Wire entry plugs are available for dry location, liquid tight, and aluminum cast fitting assembly.

Part No.: FEPW

Optional Add-Ons

Mounting Options

View Choices